Annual Inspection of Portable Fire Equipment and the FS251 Process: A Complete Guide to Inspection Duties, Checks, Electronic Certificates and Choosing a Contractor for Fire Extinguishers, Fire Blankets and Sand Buckets

Each year, when the management office or contractor announces the "annual fire inspection", many people in charge of shops and offices only know that they need to let someone in, sign a form and receive an FS251. They are often unclear what the contractor actually checks, how defective equipment is dealt with, and how the certificate should be checked and kept. From 2026, the FS251 has gone fully electronic, and the Fire Services Department (FSD) has stepped up cross-checking and spot checks, making annual inspections more transparent than before. Focusing on portable equipment such as fire extinguishers, fire blankets and sand buckets, this guide breaks down the legal duties, process and key points of annual inspection.

Quick answer: Under section 8 of the Fire Service (Installations and Equipment) Regulations (Cap. 95B), owners of fire service installations or equipment in premises must have them inspected by a Registered Fire Service Installation Contractor at least once every 12 months. Portable equipment is basic fire service equipment, generally handled by Class 3 or higher registered contractors. After completing the inspection, the contractor must issue an FS251 within 14 days and send a copy to the FSD. From 1 July 2026, the FS251 must be prepared, signed and submitted electronically, and carries an anti-counterfeit QR code. Approved portable fire-fighting equipment installed by members of the public in their own domestic premises is exempt from the statutory annual inspection duty.

Contents

  1. The legal duty of annual inspection
  2. Who must have inspections and who is exempt
  3. Who can carry out inspections
  4. The annual inspection process in seven steps
  5. On-site checks
  6. Dealing with defective equipment
  7. Checking and keeping the FS251
  8. Inspection quotations and choosing a contractor
  9. Common annual inspection problems
  10. Annual inspection management calendar
  11. Frequently asked questions

1. The Legal Duty of Annual Inspection

Section 8 of Cap. 95B sets out two main duties for owners:

Portable equipment includes fire extinguishers and fire blankets. Sand buckets are portable hand-operated appliances whose specification is set out in the FSD code; where they form part of the fire service equipment in the premises, they should also be included in the annual inspection.

The Role of the FS251

After completing inspection, maintenance, repair or other work, the registered contractor must issue an FS251 to the owner within 14 days and send a copy to the FSD. The FSD cross-checks the FS251 certificates it receives against its fire service installation records to confirm whether a contractor has carried out the annual inspection for a given installation. A single premises may therefore have several FS251 certificates in one year: one for the annual inspection and others for repairs or equipment replacement in between.

2. Who Must Have Inspections and Who Is Exempt

SituationMust it be inspected every year by a registered contractor?
Portable equipment in shops, offices, restaurants and similar premisesYes
Portable equipment provided in licensed premises under licence or FSD requirementsYes
Portable fire extinguishers provided by law in prescribed commercial premisesYes
Equipment in common corridors, lobbies and staircases of residential buildingsYes (including equipment placed there by residents themselves)
Equipment installed by occupiers themselves in industrial buildingsYes
Approved portable fire-fighting equipment installed by members of the public in their own domestic premisesExempt (from 1 November 2023)

For details of the home exemption, see How to Tell Whether Portable Fire-Fighting Equipment Is FSD-Approved. Even where exempt, home equipment should still be checked regularly for rust, leaks or damage.

3. Who Can Carry Out Inspections

Annual inspections must be carried out by a Registered Fire Service Installation Contractor. Registered contractors are divided into three classes:

ClassGeneral scope of work
Class 1Can handle more complex fire service installations such as fixed fire extinguishing systems
Class 2Can handle most fire service systems, including fire retardant paint and solution treatment
Class 3Handles basic fire service equipment, such as portable equipment including fire extinguishers and fire blankets

If the premises also has fire alarm systems, hose reels, sprinklers or other systems, a contractor of the appropriate class can be appointed to handle them all together. Before appointing a contractor, check its name, registration number and class on the FSD website's "Registered Fire Service Installation Contractor list search".

4. The Annual Inspection Process in Seven Steps

  1. Check the last FS251: confirm the date of the last annual inspection and arrange the next one before the 12-month deadline.
  2. Count the equipment: list the number, type and location of all fire extinguishers, fire blankets and sand buckets in the premises.
  3. Obtain a quotation and book: give the registered contractor the equipment list and confirm the fee and attendance date.
  4. On-site inspection: the contractor checks each item and records its condition.
  5. Deal with defective equipment: repair, refill, replace or arrange testing as appropriate.
  6. Issue the FS251: within 14 days of completing the work, the contractor prepares, electronically signs and submits the FS251 through the online system, and issues it to the owner.
  7. Check and file: check the certificate details, file it together with the equipment list, and set a reminder for the next annual inspection.

5. On-Site Checks

Fire Extinguishers

Item checkedKey points
Approval statusThe model is on the FSD's approved list
LocationIn its designated place, visible and easy to reach, not obstructed
CylinderNo corrosion, dents, damage or leaks
Pressure gaugeNeedle in the normal range (where a gauge is fitted)
Safety pin and sealIntact, not pulled out or damaged
Nozzle and hoseNo blockage, cracks or ageing
LabelClear, with operating instructions in Chinese and English
Weight or contentsChecked as appropriate for the type to confirm it is full; CO2 extinguishers, for example, are generally checked by weighing
Test recordsConfirm, according to the equipment type and code requirements, whether periodic testing is due

Fire Blankets

Sand Buckets

For detailed sand bucket maintenance, see How to Maintain a Sand Bucket and How Often to Change the Sand.

6. Dealing with Defective Equipment

ProblemCommon remedy
Low pressure or insufficient contentsTop up or recharge
Missing safety pin or sealCheck whether the equipment has been used; refill if needed and reseal
Light corrosion or faded labelClean and replace the label
Serious corrosion, dents or leaksReplace the equipment
Damaged nozzle or hoseReplace the part
Equipment due for periodic testing under the codeArrange testing or replacement
Model never approvedReplace with approved equipment
Wrong location or obstructedReturn it to its designated place and clear obstructions
Sand bucket low on sand or dampTop up or dry the sand; replace contaminated sand

FS251 After Repairs

If the contractor finds defects during the annual inspection, the FS251 will record them. The owner should arrange repair or replacement as soon as possible, after which the contractor issues the corresponding certificate. The new FS251 also includes sections such as follow-up questions on defects, making records clearer.

Recycling Old Equipment

Replaced fire extinguishers that still contain chemicals or internal pressure should be treated as chemical waste, and their collection can be arranged by a registered contractor. Never take them apart yourself or throw them away with ordinary rubbish.

7. Checking and Keeping the FS251

What Has Changed with Electronic Certificates

In mid-2026 the FSD launched an upgraded online FS251 submission system, and from 1 July 2026 it only accepts certificates prepared, signed and submitted electronically by contractors. Contractors enter the building address, type of fire service installation, inspection results, defects and repair status into the system, sign using "iAM Smart" or a Hongkong Post e-Cert, and once submitted the system generates a formal electronic certificate with an anti-counterfeit QR code. The FSD has also said it will spot-check half of all contractors each year. The old FS251 (Revision 1/2016) was abolished from 1 April 2026. See how electronic FS251 certificates are issued.

What to Check When You Receive the FS251

Item to checkConfirmed
Premises address is correct□
Equipment types listed match what is on site□
Inspection date is correct, and the issue date is within 14 days of completing the work□
Defects (if any) are clearly listed□
Contractor name, registration number and class are correct□
Certificate carries an anti-counterfeit QR code□

Record-Keeping Tips

8. Inspection Quotations and Choosing a Contractor

Fee Reference

There is no standard fee for annual fire inspections. According to industry information, depending on the type of premises, the amount of equipment and the complexity of the systems, annual inspection fees may start from about HK$2,000, with projects involving more equipment or complex systems costing more. Small premises with only portable equipment are generally charged less than premises with large systems. The actual fee depends on the contractor's quotation.

What the Quotation Should Specify

Key Points When Choosing a Contractor

  1. Check its registration and class on the FSD list
  2. A clear quotation setting out the scope of inspection and any extra charges
  3. Able to explain clearly why equipment has failed and how it will be dealt with
  4. Able to issue the electronic FS251 on time
  5. If the premises has other fire service systems, able to handle or coordinate them together

9. Common Annual Inspection Problems

Missing the 12-Month Deadline

An overdue inspection means the statutory duty has not been met. Arrange an inspection as soon as possible and set reminders so it does not happen again.

Equipment Numbers Not Matching the Last Inspection

Equipment may have been moved, lost or added. Count it before the inspection and update the equipment list.

Inspecting Without Fixing Defects

Once the FS251 lists defects, the owner is responsible for arranging repairs. Simply holding the certificate without dealing with them does not mean the equipment works.

"Replace with New" Instead of an Inspection

Some sales pitches use "replace your fire extinguishers with new ones" as a lure. Equipment that passes inspection does not need replacing; ask the contractor to explain why any item has failed.

Unregistered Persons Offering "Inspections"

Unregistered persons cannot issue a valid FS251. Check the contractor's registration details and confirm that the certificate carries an anti-counterfeit QR code.

10. Annual Inspection Management Calendar

TimingWhat to do
MonthlyVisual self-check of equipment locations, pressure gauges, safety pins and sand bucket levels
1 month before the annual inspectionCount equipment, obtain quotations and book a contractor
On the day of the inspectionAccompany the contractor and record any defects
Within 14 days after the inspectionReceive and check the electronic FS251
After the inspectionArrange repairs of defective equipment, update the equipment list and file records
After any use of equipmentNotify the contractor immediately to refill or replace it

For equipment provision in different settings, see How to Provide Portable Fire Equipment for Construction Sites, Kitchens and Warehouses. For overall annual fire inspection arrangements, see our Complete Guide to Fire System Maintenance and FS251 Annual Inspection.

11. Frequently Asked Questions

How often must fire extinguishers be inspected?

Under section 8 of Cap. 95B, fire service installations and equipment in premises must be inspected by a Registered Fire Service Installation Contractor at least once every 12 months.

Do home fire extinguishers need annual inspection?

From 1 November 2023, approved portable fire-fighting equipment installed by members of the public in their own domestic premises is exempt from the statutory annual inspection duty. Equipment in common areas, industrial buildings or installed as required by law must still be inspected annually.

Which class of contractor can inspect fire extinguishers?

Portable equipment is basic fire service equipment, generally handled by Class 3 or higher Registered Fire Service Installation Contractors. You can check the class on the FSD website's contractor list search.

How soon after the inspection will I receive the FS251?

The contractor must issue the FS251 within 14 days of completing the work and send a copy to the FSD. From 1 July 2026, certificates are submitted and issued electronically.

How can I verify an electronic FS251?

The new electronic certificate carries an anti-counterfeit QR code. When you receive it, check the address, equipment types, dates, contractor details and any defects, and confirm that the certificate carries the QR code.

What happens if a fire extinguisher fails the annual inspection?

Depending on the problem, the contractor will recommend refilling, repair, testing or replacement. The FS251 will record the defect, and the owner should arrange for it to be dealt with as soon as possible.

Do sand buckets need annual inspection too?

The FSD code requires sand buckets to be inspected every 12 months or after use in a fire. Where a sand bucket forms part of the fire service equipment in the premises, it should be included in the annual inspection.

How much does a fire extinguisher annual inspection cost?

There is no standard fee. According to industry information, annual fire inspection fees may start from about HK$2,000, depending on the amount of equipment, type of premises and complexity of systems. The actual fee depends on the contractor's quotation.

What are the consequences of an overdue annual inspection?

An overdue inspection means the statutory duty under Cap. 95B has not been met. Arrange an inspection by a registered contractor as soon as possible and set reminders so it does not happen again.

Is it normal to have several FS251 certificates in one year?

Yes. Besides the annual inspection, contractors also issue an FS251 after repairs, refills or equipment replacement in between.

Portable Equipment Annual Inspection Services

Grand United Eng., Co. is a Registered Fire Service Installation Contractor in Hong Kong. We provide annual inspections of fire extinguishers, fire blankets and sand buckets for shops, offices, restaurants, workshops, warehouses and buildings, handle refills, repairs and replacements, and issue the electronic FS251 on time. When you contact us, please provide the premises address, the number and types of equipment, and the date of the last FS251. You can also browse our Fire Safety Products, Fire Engineering Services and Service Coverage.

Book a portable equipment annual inspection, or call 2667 7701.