Grand United Eng., Co. Efforts to provide expertise to Hong Kong citizens and businessesFire engineering。 In addition to the provision of fire service installations, installation, maintenance and maintenance services, we are more interested in raising public awareness of fires and reducing the risk of fire through sharing practical fire safety knowledge.
This page regularly publishes fire safety stamps, teaching articles and practical guides covering all aspects of fire safety preparedness, daily fire prevention measures, fire-fighting equipment selection, fire should change. Whatever you are shop owners, restaurant operators, industrial building tenants or citizens in general can find practical fire safety information here.
Selecting fire safety teaching articles
Business and Repair Series
opening a new shop formerly 10 fire engineering emphases
Prepared to start the business? Understanding key information such as fire safety facilities that must be checked before renting a shop, fire safety certificates required for the application of licence, plans approval processes, acceptance inspection attention matters, etc., and avoiding delays in operating owing to fire safety issues.
Read more →
Fire safety mistakes of the most common perpetrators during refurbishment
Changes in fire service installations, blocking of fire routes and unauthorized change of use during the renovation period are common errors that may lead to a failure of acceptance inspection or a violation of legislation. The present document lists the safety and security matters that must be taken into account in connection with refurbishment.
Read more →
fire safety equipment selection series
How can appropriate fire extinguisher be selected?
How should different fire extinguisher be selected on the surface, including dry powder, carbon dioxide, foam and K. This paper provides a detailed explanation of the use of various types of fire extinguisher, the place of application, methods of use and maintenance requirements.
Read more →
Full guidance for home safety and security equipment
The introduction of household-owned fire safety equipment, including independent smoke alarms, fire extinguisher, fire blanket, etc., as well as the proposed location and use of a clerk to guarantee the safety of families.
[To be launched]
fire Prevention Series
10 daily habits of fire prevention
Beginning with daily details such as electricity security, fire prevention in kitchens, storage of flammable items and pyrotechnic treatment, good practices are built to effectively reduce the risk of fire.
[To be launched]
List of high-risk location inspections at business sites
What are the high-risk locations where offices, shops, factories, warehouses etc. provide a list of practical checks to help you identify and eliminate the dangers of fire early in your life.
[To be launched]
fire should change series
fire The right way to escape at the time of occurrence
Knowledge of the variants of fire, choice of escape routes, handling of smoke and when residual units should be kept, etc., is kept in a quietly correct response at a critical time.
[To be launched]
How can fire extinguisher be properly used?
A detailed demonstration of the steps taken to use fire extinguisher (PASS), the application, safe distance and when important information such as fire extinguishers should be abandoned.
[To be launched]
We will continue to update more practical fire safety stamps and teaching articles, welcoming the regular reading of this page, orSubscription of our newsletterAccess to up-to-date information.
Welcome any doubts about fire engineeringContact usReference.
opening a new shop formerly 10 fire engineering emphases
The opening of new shops is an important step in entrepreneurship, but many entrepreneurs have been delayed and even fined because they do not know the safety requirements for fire. This paper consolidates the focus of fire engineering, which must be known prior to opening up, and assists you in the smooth running of business.
1. renting a shop before learning about fire safety requirements
The issue of fire safety was not found until the contract was signed!
The renting a shop must examine:
- Year of building: Large-scale fire safety enhancements may be required in the old building completed by 1987
- Existing fire service installations: Exposure of fire safety facilities within the unit and in the public sector of the main dam
- fire safety plans:: Copies of fire safety plans to owners on the approved fire protection system
- Use restrictionsRecognition of whether or not the unit ' s authorized purposes are in accordance with your operational requirements
- Ownership responsibility:: Understanding who is responsible for fire engineering and maintenance in the leases
Practical recommendations:: Engagement of a registered fire engineering company to conduct an assessment prior to renting a shop, providing initial " and timelines.
2. Different industry fire safety requirements
fire safety requirements vary according to the nature of the operation:
General retail shop :
- fire alarm system ( smoke detector, mobile fire ⁇ , fire alarm bell)
- emergency lighting and exit sign
- Shand fire extinguisher
restaurants (high fire risk):
- above-mentioned basic facilities
- Category K fire extinguisher (priving of kitchen)
- fire blanket
- Pumping system fire-fighting devices (partially)
- Fire-resistant separation of kitchens
beauty salon / massage establishment :
- Strengthening emergency lighting
- Planning of escape routes
- Special licence may be required
Education centres:
- Adherence to the special requirements of the Education Bureau and Fire Services Department
- Sufficient export to escape
To know what fire service installations are needed in your industry in order to be able to accurately budget and arrange.
3. Adequate time and budget
When required, fire engineering is underestimated:
Time budget:
- Plan design: 1 - 2 weeks
- Plans Approval: 4-8 weeks
- Procurement materials: 1 - 2 weeks
- Construction installation: 1-4 weeks (different to size)
- Testing of tests: 3-7 days
- Application acceptance inspection: 2-4 weeks
Total time of approximately 2-4 monthsIt is suggested that a three to four months be set aside for a more robust period of time.
Cost budget (reference):
- Small shop (under 500): approximately $30,000-$80,000
- Medium shop (500-1,500 pounds): approximately $80,000 to $200,000
- restaurant (different to the size of the kitchen): $150,000 or more
Costs include plans, fire service installations, installation of manual work, government fees, acceptance inspection etc.
4. Need to retain registered fire service installation contractor
This is a legal requirement, not an option!
- All fire engineering must be carried outRegistered Fire Service Installation ContractorResponsible
- The work performed by a non-registered contractor is illegal and not recognized by Fire Services Department
- Registered contractor Class 3 and different levels of engineering
- Access to Fire Services Department website
How can the contractor be selected?
- Recognition of qualifications and levels of registration
- Looking at past experience and project examples
- Comparison of at least three companies "
- Confirmation of one-stop service delivery (plans, installation, acceptance inspection, maintenance)
- Post-travel maintenance support
5. The fire safety plans must be approved for construction
Earlier!
- fire safety plans to be submitted for approval by Fire Services Department
- Construction may commence only after approval
- Unauthorized construction is illegal and works are not recognized
- Construction must be carried out in strict conformity with the plans
- If the plan is to be changed, it will be necessary to resubmit the approval
Plans 4-8 weeks of approvalThe application for business is pending.
6. Refurbishment and fire engineering need to be coordinated with each other
The fitting design must take into account fire safety requirements:
Common conflict:
- Cyclone design sero detector
- Spacing of escape routes
- Specified fire extinguisher or hand-held fire
- Lamps, packing impact chicken water spray coverage
- Spoilers are highly inadequate to install fire service installations
The right approach:
- Fire engineering companies have been consulted during the design phase
- Ensure that the fitting design is in line with fire safety plans
- Placement of fire service installations
- Complementary and fire safety construction time
7. Access to fire must be maintained
This is the most basic but often neglected requirement!
- The escape route within the unit cannot be blocked by private home and goods
- Exports must be easy to start and not locked.
- The public building gradients and corridors of the Great Depression are not retrievable
- door Non-destruction or permanence
- exit sign must be clearly visible
Violation may be issued by Fire Services DepartmentEliminating fire hazard notificationThe fine is $25,000 and three months ' imprisonment.
8. Acceptance inspection must be completed before all tests are completed
Before applying for Fire Services Department acceptance inspection, the contractor will conduct a comprehensive test:
Testing projects include:
- smoke detector sensitivity testing
- Hand-held fire crash test
- fire alarm bell metric tests (at least 85 minutes)
- emergency lighting continuous time test (at least 3 hours)
- fire hose reel water pressure test
- fire extinguisher Pressure Review
- System-wide rolling tests
Ensure that all systems are functioning properly in order to adopt acceptance inspection.
9. A certificate of fire safety is obtained to apply for a licence
Operation of restaurant, hotels, consortia and other operations requiring a licence must first be obtainedfire safety certificate (FS 161):
Application process:
- Delivery of licence applications to relevant sectors (e.g., EFA)
- Referral of Fire Services Department audit
- Fire Services Department issue fire safety provisions
- Completion of fire engineering and acceptance inspection
- Fire Services Department issued fire safety certificates
- Licensing by relevant departments
No fire safety certificate, no business licence !
10. Periodic maintenance and annual inspection are ongoing responsibilities
It is not once and for all that will be sustained:
- Every 12 monthsAn annual inspection by registered contractor is required
- CompletedFS251 formsSubmitted to Fire Services Department
- Detection of damage to be repaired as soon as possible
- Maintenance of fire service installations
- Failure to conduct an annual inspection could be prosecuted, with a fine of $25,000 and imprisonment for six months
It is recommended that annual maintenance contracts be signed and annual inspections are regularly reminded to expire.
Summary: Preparing for a smooth start
Pre-cautional fire safety planning can avoid the following problems:
- Delays in operating time
- Overbudgeting
- Receiving non-qualified inspection
- Violation of legislation by fine
- Impact licence application
Grand United Eng., Co. Recommended business schedule:
- renting a shop formerly: Fire safety company assessment
- Upon signature:: Starting the design of fire safety plans
- Plans submitted for approval: Simultaneous fitting design
- Plans received: Start of fire safety construction (in conjunction with refurbishment)
- Completion testingApplication acceptance inspection
- Certificate of fire safetyApplication for business licence
- Successful business
Welcome any doubts as to the opening of fire engineeringLiaison Grand United Eng., Co.For inquiries, we provide free assessment and " services " .
Fire safety mistakes of the most common perpetrators during refurbishment
When shop or office renovations were carried out, a number of owners and improvement companies focused only on glorification and practicality, neglecting fire safety requirements, leading to failure of acceptance inspection, the need to return to work and even violating legislation. This paper sets out the most frequent fire safety errors in refurbishment and helps you to escape these traps.
erroneous 1: Unauthorized changes to fire service installations
This is the most serious mistake!
- Dismantling or mobile smoke detector, mobile fire tumours, fire alarm bell
- Dismantling or modification of gamma spraying
- Removal of emergency lighting lamps or exit sign
- Dismantling fire hose reel or fire extinguisher
Consequence:
- Violation of fire safety legislation can be prosecuted
- fire protection system lapsed and fire was not operational
- Accepted inspection
- Impact licence application
The right approach:
- If the fire service installations need to be changed, a registered fire service installation contractor must be hired
- Redesign fire safety plans
- Submitted to Fire Services Department
- Subject to approval, change
erroneous 2: astronomy for fire service installations
Installation of fictitious flowers, slides, dressing, and possible fire service installations:
FAQs:
- Fruit flower smoke detector, affecting the scope of detection
- Spraying ranges for slide lamps, block water spraying
- Tyres emergency lighting lamps
- Advertising sign
The right approach:
- Maintenance of fire service installations during the design of astronomy
- Ensure smoke detector access within 0.5 metres around
- Maintenance of flux in the underwater spray
- emergency lighting and exit sign clearly visible
erroneous 3: spacing designs to block escape routes
Spacing may block the original escape route
FAQs:
- Additional spacing orders altered or distorted routes
- Only one export for room design
- Storage rooms, toilet blocked sub-exports
- Excess length of escape routes
The right approach:
- Advice on fire engineering prior to design
- Ensure that all locations have at least two directions to escape
- Maintaining grace of escape routes (normally at least 1.05 m)
- Distance of escape is regulated (depending on the type of location)
error 4: Unauthorized change of use
The unit ' s safety requirements are determined by use:
Common violations:
- Office alteration to restaurant (no additional kitchen fire safety facilities)
- shop, converted to a drift room (without applying for fire service installations)
- Industrial building converted to shop or residence (not meeting fire safety requirements)
Consequence:
- Violation of the Buildings Ordinance and fire safety legislation
- Existing fire service installations are not in line with new uses
- Custody, prosecution
- Seriously restraining orders
The right approach:
- Pre-use change application for approval by NASA
- Redesign fire protection system to new uses
- Submission of fire safety plans
- Completion of engineering and acceptance inspection
Variance 5: Use of flammable repairs
Partial improvements are flammable, increasing the risk of fire]:
High-risk material:
- Flammable surfaces, windows
- foams, bubberboards
- Non-fired wood
- Flammable insulation
The right approach:
- Use of materials that meet fire safety standards
- Timber fire-proofing
- Cables, windows selected for fire-resistant grade products
- Retained fireprotection certificate
erroneous 6: Overload of the electricity system
Increase in the number of electrical appliances when fitting, which may exceed the electricity load
FAQs:
- Use of trailer connectors
- Insufficient electrical cable capacity
- Inadequate number of placements and excessive use of tens of thousands
- Flammable material via wire
The right approach:
- Employed registered power contractor to assess electricity demand
- Increase of sufficient number of interventions
- Use of compliance grids and switches
- Periodic examination of the electricity system
erroneous 7: blocking or abetting fire safety equipment
Upon completion of the refurbishing, the mercy of the house and the goods may block fire safety equipment:
FAQs:
- Cargo mounted, displayed fire extinguisher or hand-held fire
- Storage blocked fire hose reel
- Breakers on fire service installations
- Disruption of the passage through which the goods escaped
The right approach:
- fire safety equipment with 1 m of net air prior to maintenance
- The position of hand fire and fire extinguisher is clearly visible
- Non-enabled fire safety equipment
- Maintenance of fire tunnels
erroneous 8: No sufficient number of fire service installations were installed
Changes in the area or use of refurbishing may be inadequate for old fire service installations:
Often inadequate:
- No smoke detector was installed in additional rooms
- The number of fire extinguisher did not meet the surface area requirement
- Additional kitchens were not equipped with K-type fire extinguisher
- Emergency lighting lamp cover inadequate
The right approach:
- Re-engineering the fire protection system in line with the new faint map
- Ensure that all rooms have sufficient fire service installations
- Compliance with minimum fire service installations and equipment code
erroneous 9: fire door was dismantled or modified
door is an important fire safety facility:
Common violations:
- Removal of stairy fire door
- fire door plus packing, affecting fire prevention function
- door closed doors were dismantled and gates were routinely opened
- door to general gates
Consequence:
- The fire cannot be prevented from spreading the fire and fuze.
- Violation of fire safety legislation
- Accepted inspection
The right approach:
- Non-removal or modification of fire door
- door must be equipped with closed doors to maintain permanent closures
- If replacement is required, the gate of the equivalent fire level shall be used
error 10: No acceptance inspection was applied after construction
Part of the owner is expected to operate for refurbishment, neglecting acceptance inspection procedures:
Frequent:
- No acceptance inspection was applied after changes to fire service installations
- Additional fire service installations not notified Fire Services Department
- No fire safety certificates were obtained, i.e.
Consequence:
- Engineering not recognized
- Failure to obtain a licence
- Prosecuted
The right approach:
- Completion of fire engineering and subsequent application for Fire Services Department acceptance inspection
- Certificate of fire safety (FS 161)
- Preservation of acceptance inspection documentation
Summary: fire safety planning prior to refurbishment
The best way to avoid these errors isConsultant in the registration of fire engineering companies prior to refurbishment:
- Understanding existing fire service installations and plans
- Replanned fire protection system based on fitting design
- Submission of fire safety plans
- Synchronization and fire engineering
- Full post-completion test
- Application for acceptance inspection
Grand United Eng., Co. provides fire safety planning services, from design to acceptance inspection on a one-stop basis, to ensure that your refurbishment project meets the fire safety requirements.
How can appropriate fire extinguisher be selected?
Fire extinguisher (fire extinguisher) is the most common hand-held fire-fighting device, but there are a variety of types on the market and how should it be chosen? Misuse may exacerbate the fire and even endanger its security. This paper provides a detailed explanation of the characteristics, uses and selection of the clerks for various types of fire extinguisher.
Awareness of fire classification
Before selecting fire extinguisher, it is important to know the classification of fire:
Category A fire: general solid substances
- Timber, paper, layout, plastic, etc.
- Remaining dust after combustion
- Fit for water or foam extinguishment
Category B fire: flammable liquids
- Petrol, diesel, alcohol, painting, solvent etc.
- Fluid surface combustion
- Non-water extinction (and fire spread)
Category C fire: flammable gases
- Oil, gas, gas, gas, etc.
- Gas leakage to fire
- Necessary closing of gas sources
Electrical fire (special category)
- Electrical, electrical, appliances, etc.
- Fire extinguishers subject to unguided fire
- Power sources should be cut off first
Category K fire: fat
- High-temperate oil fats, such as oil and animal fat
- High temperature (300-400 degrees Celsius)
- Specialized fire extinguishers are required
Frequent fire extinguisher type and use
1. Dry powder fire extinguisher (ABC fire extinguisher)
Most commonly used multi-purpose fire extinguisher
Fire extinguishers: phosphate dry powder
The applicable fire: Category A, category B, category C and electrical fire
Advantages:
- Extensive use and suitable for most of the sites
- Very rapid fire extinguishing
- Prices are relatively cheap
- Maintenance simple
Shortcomings:
- Residues of powder left after the fire extinguish and need to be cleared
- Possible damage to sophisticated instruments
- Lower visibility
Availability:
- Office, shop, warehouse
- Factories, cars
- General home
Capacity options:
- Home: 1 - 2 kg
- Small shop : 2-4.5 kg
- Large premises: 4.5-9 kg
2. Carbon dioxide fire extinguisher (CO2 fire extinguisher)
Electr fire
Fire extinguishers: High pressure fluid carbon dioxide
The applicable fire: Category B and electrical fire
Advantages:
- Non-conductible, suitable for electrical fire
- No residues after fire
- Non-damaged equipment
- Accommodating instruments
Shortcomings:
- Only Category B and electrical fires (no extinction)
- Possible refuelling after fire
- Use in closed space may lead to anaerobic
- The spray temperature is very low and may be frozen
Availability:
- Computer server room, data centre
- Telecommunications server room, distribution room
- Laboratory, library
- Museums, art collection rooms
Use of:
- Hand-held handcuffs, not directly exposed to spraying (that would be unfrozen)
- Departure from the ventilation immediately after use
- Not available for extended periods of time in narrow closed space
3. Foam fire extinguisher
Oil-suitable fire
Fire extinguishers: Water foam (AFFF)
The applicable fire: Category A, category B
Advantages:
- foam cover combustion surfaces, insulation oxygen
- The cooling effect is good
- Oil extinguished fire
- Prevention of refuelling
Shortcomings:
- Not available for electrical fire (foam-led electricity)
- Post-flight clearance
- Maintenance more complex
Availability:
- Painting stations, reservoirs
- Chemical plants, painting plant
- Parking, garage
- Location of flammable liquids
4. K kitchen fire extinguisher
fat fire specially designed for kitchen oil
Fire extinguishers: Solubility of nitrogen acid
The applicable fire: Category K (sawing oil fat) and A
Advantages:
- Digital reactions with high temperature oil
- Formation of sparked insulation oxygen
- Effective prevention of refuelling
- The cooling effect is strong
Shortcomings:
- Only fat fires are applied to the kitchen oil
- High prices
- Higher maintenance requirements
Availability:
- restaurant, hotel kitchen
- Cafeteria, food processing plants
- Commercial kitchens
Important: Crude oil fat fire can never be used for water extinction, leading to explosive combustion!
5. Water agent fire extinguisher
General solid fires
Fire extinguishers: Acquisition or additives
The applicable fire: Category A only
Advantages:
- Optimal cooling effect
- Environmentally clean-up
- cheaper prices
Shortcomings:
- Fruit fire extinguishing category A
- Not usable for B, C or electrical fire
- Possible damage to electrical equipment
- Possible cooking ice
Availability:
- Warehousing of solid flammables only
- Timber Plant, paper plant
- Outdoor sites
How can appropriate fire extinguisher be selected?
Selection by location
Home:
- Visitors ' rooms: 2 kg of ABC dry powder fire extinguisher
- Leave: 1-2 kg of K fire extinguisher + fire blanket
- Vehicle: 2 kg of ABC dry powder fire extinguisher or bubble fire extinguisher
Office:
- General region: 4.5 kg of ABC dry powder fire extinguisher
- Computer server room : 2-3 kg CO2 fire extinguisher
- Pump water: 2 kg of ABC dry powder fire extinguisher
shop :
- Retail shop : 4.5 kg ABC dry powder fire extinguisher
- Food shop: 2-4.5 kg ABC dry powder fire extinguisher
- Clothing: 4.5 kg of ABC dry powder fire extinguisher
restaurant :
- Leave: 6 litres of fire extinguisher + fire blanket
- Catering area: 4.5 kg of ABC dry powder fire extinguisher
- Logistic area: 4.5 kg ABC dry powder fire extinguisher
Factories/warehouses:
- General site: 9 kg of ABC dry powder fire extinguisher
- Chemical plant: foam fire extinguisher + ABC dry powder fire extinguisher
- Electronic plant: CO2 fire extinguisher
Calculated by area
Hong Kong Fire Services Department recommendation
Home:
- Less than 1,000 square kilometers: at least 1 2 kg of fire extinguisher
- Area greater than 1,000 square kilometre: increase as required
Commercial premises:
- At least 1 9 kg of fire extinguisher per 200 m2 (approximately 2,150 square kilometers)
- or at least 1 4.5 kg of fire per 100 m2
- Increase in the number of high-risk sites
Distance:
- The distance from any location until recently fire extinguisher does not exceed 15 metres
fire extinguisher ' s correct use method
PASS Law
- P "#8211; Pull (upgrading):Upgrading of security inserts
- A "#8211; Aim ( ⁇ ):Brigadier-made source base
- S "#8211; Squeeze (pressure):Under pressure
- S "#8211; Sweep (clearing):Some sweeping
Use of matters of interest
- Maintenance of safe distances:Located on the source of fire at 2-3 m
- Brigadier-General source:Refrain from targeting the roof of fire
- Some of the sweeps:Coverage of whole combustion range
- Take note of the following:Ensure that there are subsequent escape routes
- Ongoing observation:Ensure that the source of fire is completely extinguished and prevents refuelling
When should fire extinguisher be used?
- The fire was too large and fire extinguisher could not be controlled
- Synthesis, low visibility
- Routes of escape blocked
- Uncertained source nature
- Threats to personal security
Keeping in mind: Life Safety First! If the fires are not controlled, they withdraw immediately and report to the police.
fire extinguisher maintenance and inspection
Daily inspections
- External:No corrosion, trap, damage
- Pressure tables:Needs should be green (normal pressure)
- Safety inserts:Completeness and accessibility of inspections
- Soft and spraying:No discouraging or tearing
- Labels:Confirmation of the date of inspection
- Position:Ensure placement in designated positions and easy access
Regular maintenance
- Every 12 months:Inspection by registered fire service installation contractor
- Every 5-10 years:Refilling or replacement (different to type)
- Under pressure:Immediate filling
- expired or damaged:Immediate replacement
Deposited matters of interest
- Detained in a vagina dried.
- Avoidance of sunlight
- Avoiding the wet environment
- Distance from thermal source
- Fixed to walls or placed in visible positions
- Highly appropriate for easy access (approximately 1-1.5 m)
Procurement of fire extinguisher ' s attention
- Selection of endorsed products:Ensure compliance with Hong Kong Fire Services Department accreditation criteria
- Location of labels:Types of identification, volume, methods of use, date of manufacture
- Inspection pressure sheets:New fire extinguisher pressure should be normal
- Keeping documents:Facilitation maintenance and reimbursement
- Request model:Understanding the correct use of methods
- Access maintenance services:Vendors selected to provide maintenance services
Summary: Selection of fire extinguisher, security
The selection of suitable fire extinguisher needs to be considered:
- Type of location and risk of fire
- fire Classification
- Area of the building
- Budget
- Maintenance facilities
Suggested:
- Home: ABC dry dust fire extinguisher (Public Lobby) + K type fire extinguisher (kitchen house) + fire blanket
- Office: ABC dry powder fire extinguisher + CO2 fire extinguisher ( server room )
- restaurant : K type fire extinguisher (kitchen house) + ABC dry powder fire extinguisher (def area)
- shop : ABC dry powder fire extinguisher
Periodic inspections and maintenance of fire extinguisher ensure that key moments function. If there is any doubt as to the choice of fire extinguisher, welcomeContact usFor inquiries, we provide professional advice and supply services.
Grand United Eng., Co.
:: Quality: Reliable
Your fire safety adviser
