How Much Does Fire Retardant Paint Cost in Hong Kong? A Complete Guide to Prices with FS251, Cost Calculation and Comparing Quotations
After the Fire Services Department (FSD) asks you to apply fire retardant treatment to false ceilings, timber partitions or curtains, the first question most people ask is: "How much does fire retardant paint cost?" Ask three companies and you may get three very different figures. This is not because anyone is overcharging. It is because fire retardant paint quotations differ in what they include, which materials they cover and the site conditions involved. This guide first sets out publicly listed price ranges in Hong Kong, then breaks down what makes up the price, and finally uses practical examples to show how to estimate a budget and compare quotations.
Quick answer: Based on publicly listed quotations in Hong Kong, fire retardant paint work with an FS251 for a small shop or standard exhibition booth starts from about HK$5,000, increasing progressively with area. High-ceiling or more complex projects can exceed HK$10,000. Certifying materials that already comply costs less, while fabric treatment with fire retardant solution is usually charged per square metre. The actual amount depends on the material, area, height and site conditions, and can only be confirmed after assessment by a contractor.
Contents
- Reference price ranges in Hong Kong
- What a fire retardant paint quotation includes
- 10 factors that affect the price
- Curtain and fabric treatment costs
- Budget calculation examples
- How to compare quotations
- Legitimate ways to save money
- Common pricing traps
- Booking and work schedule
- Frequently asked questions
1. Reference Price Ranges in Hong Kong
There is no official standard price for fire retardant paint work. The ranges below are compiled from publicly listed quotations in the market. They are for budgeting reference only and are not the fixed price of any contractor:
| Project type | Publicly listed price reference | Notes |
|---|---|---|
| Small shop or booth (first approx. 22.5 m²) | From about HK$5,000 | Usually includes the work and FS251 |
| Progressive pricing by area | About HK$1,000 more for each additional 22.5 m² or so | For example, about HK$6,000 up to 45 m² and about HK$7,000 up to 67.5 m² |
| Standard exhibition booth | About HK$5,000 to HK$7,500 | Depends on booth area and amount of material |
| High-ceiling projects | About HK$10,000 or more | Requires high-access tools or lifting equipment |
| Small local treatment | Some companies list from about HK$1,500 | Confirm separately whether FS251 is included |
| Certification only for compliant materials | About HK$1,500 to HK$3,500 | Mainly covers documentation and on-site verification |
As the table shows, fire retardant paint is usually not priced simply "per square foot". Instead, there is a starting price, with charges increasing by area or quantity. Every project, however small, requires the contractor to attend site, prepare materials, carry out the work and handle the certificate, and these are fixed costs. As a result, the larger the area, the lower the average cost per square metre.
Why Fire Retardant Paint Costs Much More Than Ordinary Paint
Labour for ordinary emulsion wall paint is charged at a few dollars per square foot, whereas fire retardant paint often starts at several thousand dollars. The difference comes from three things. First, the product must be a fire retardant paint or solution accepted by the Director of Fire Services, which costs more. Second, the work must be carried out by a Class 2 Registered Fire Service Installation Contractor, with coverage and number of coats controlled to the product specification. Third, the contractor must issue an FS251 and send a copy to the FSD, taking on professional responsibility. In other words, the client is paying not just for paint, but for proof of compliance that stands up to the FSD. For the basics of fire retardant paint, see What Is Fire Retardant Paint? Principles, Types and Hong Kong Fire Safety Requirements.
2. What a Fire Retardant Paint Quotation Includes
A complete fire retardant paint quotation usually consists of the following parts. When comparing quotations, check each item to see whether it is included:
| Quotation item | What it covers | Questions to confirm |
|---|---|---|
| Site assessment | Inspecting materials, measuring areas, judging whether treatment is possible | Is there a charge? Can it be deducted if you proceed? |
| Materials | Fire retardant paint or solution accepted by the Director of Fire Services | Which product will be used? Is it on the FSD's accepted list? |
| Labour and application | Surface preparation, brushing or spraying, controlling coats and coverage | What area is the quotation based on? |
| Tools and access equipment | Ladders, scaffolds, high-access work platforms | Is there an extra charge for high ceilings? |
| FS251 certificate | Issuing the certificate after completion and sending a copy to the FSD | Is it included? Which registered contractor issues it? |
| Transport and attendance | Delivering materials and staff to site | Are there surcharges for remote areas or outlying islands? |
| Out-of-hours surcharge | Night, weekend or public holiday work | How is the surcharge calculated? |
The FS251 Is the Core of the Quotation
Under the regulations, a Registered Fire Service Installation Contractor must, within 14 days of completing the relevant work, issue an FS251 to the person who instructed the work and send a copy to the FSD. For licensed premises, the FSD will not accept the work without an FS251, even if fire retardant paint has been applied. Any quotation that does not clearly state "FS251 included" and name the issuing registered contractor should not be judged on price alone. For more on the use and procedure of the FS251, see our Complete Guide to Fire System Maintenance and FS251 Annual Inspection.
3. 10 Factors That Affect the Price of Fire Retardant Paint
1. Treatment Area
Area is the most direct factor. Quotations are usually calculated in square metres, with a starting area plus progressive charges. Measuring the walls, ceilings, partitions and fabrics that need treatment before you enquire will give you a more accurate quotation.
2. Type of Material
Solid timber, plywood, fabric and carpet each use different products and treatment methods. Timber is usually brushed or sprayed with fire retardant paint, while fabric is usually sprayed or soaked with fire retardant solution. Material quantities and processes vary, and so does the price.
3. Surface Condition
The fire retardant product must be able to adhere to or penetrate the material. Surfaces that are already painted, topcoated, baked-enamelled or waterproofed generally cannot be treated directly. If existing coatings must be removed first, or the material replaced instead, costs rise sharply, and in some cases treatment is not possible at all.
4. Ceiling Height
Standard ceilings can be worked from a ladder. High ceilings, double-height spaces or large exhibition structures need high-access platforms or lifting equipment, with more labour and safety measures. In the market, quotations for high-ceiling projects are often double or more those for ordinary projects.
5. Structural Complexity
Flat walls are easy to treat. Feature ceilings, grilles, carved timber decorations, multi-layer structures and many corners take longer, as each surface must be treated to the required coverage.
6. Condition of the Premises
Working in a vacant unit or one under fitting-out is simplest. If the premises is already open for business, furniture must be covered, opening hours avoided, or work carried out in stages, all of which add labour time.
7. Working Hours
Restaurants, mall shops and exhibition venues often only allow work at night or during set periods. Out-of-hours work usually involves a surcharge.
8. Location and Transport
Urban areas are generally charged at normal rates. Outlying islands, remote areas or sites requiring special delivery arrangements may incur extra transport costs. For service arrangements in different districts, see our Service Coverage.
9. Urgency
Fire retardant treatment requires booking and material preparation time. If it is only arranged a few days before a licence inspection or exhibition opening, the contractor has to redeploy staff, which may cost more, or the job may not be possible at all.
10. Whether Other Fire Safety Items Are Handled Together
If exit signs, emergency lighting or fire extinguishers also need installing, handing them to the same contractor at the same time can save on attendance and documentation costs. See our Fire Engineering Services for related services.
4. Curtain and Fabric Treatment Costs
Drapes, curtains and fabric decorations are subject to BS 5867 Part 2 Type B, not BS 476 Part 7 (see BS 476 Part 7 Class 1 vs Class 2 for the difference). Fabric is priced slightly differently from timber:
| Situation | Market price reference | Notes |
|---|---|---|
| Fabric already compliant, certification only | About HK$1,500 to HK$3,500 per set | A valid test report is required and the contractor verifies on site |
| On-site treatment with fire retardant solution | About HK$30 to HK$80 per m², plus certificate fee | Depends on fabric type and treatment method |
| Switching to compliant fire-retardant fabric | Higher fabric cost | Suitable for large areas or fabrics that are washed often |
The effectiveness of fire retardant treatment on fabric may weaken after repeated washing. If curtains need frequent washing, choosing fabric that already meets the standard may not cost more than repeated treatment in the long run.
5. Budget Calculation Examples
The examples below only illustrate how to think through a calculation. The figures are assumptions based on publicly listed market ranges and are not quotations.
Example 1: A Newly Opening Small Restaurant
| Item | Details |
|---|---|
| Materials to be treated | About 18 m² of unpainted timber wall finishes and about 10 m² of timber partitions |
| Fabric | Curtains already have a BS 5867-2 Type B test report |
| Ceiling height | Standard |
| Stage of work | During fitting-out, before painting |
Calculation: The timber totals about 28 m², exceeding the first 22.5 m². Under progressive pricing it falls into the second band (up to 45 m²), with a reference price of about HK$6,000. As the curtains already have a report, only the documents need confirming, with no fire retardant solution treatment required. Because the work is done before painting, no old coatings need removing and there is no out-of-hours surcharge. The initial budget is therefore about HK$6,000, though the actual figure depends on the contractor's assessment.
If the timing is wrong: suppose the same restaurant only discovers that treatment is needed after the timber walls have been painted. The finishes may then need replacing or the coatings stripping, and material and labour costs could far exceed the fire retardant treatment itself, while also delaying the opening date.
Example 2: A Standard Exhibition Booth
A standard booth no larger than 3 m × 3 m × 2.5 m (length, width, height) is built with plywood back panels and fabric backdrops. Because the area is small and the structure simple, market quotations generally fall in the starting price range, about HK$5,000 to HK$7,500. If the booth is taller than 3 m or has a double-deck structure, organisers usually also require other safety documents in addition to fire retardant treatment, so set aside a separate budget for these.
Example 3: A High-Ceiling Clubhouse
A clubhouse lobby with a high ceiling features a large timber grille ceiling and fabric decorations. Because high-access platforms are needed, there are many corners to treat, and work can only be done outside opening hours, the quotation may exceed HK$10,000. Projects like this should have a site assessment and should not be priced on area alone.
6. How to Compare Quotations
The most common mistake when comparing quotations is looking only at the total. Put all the quotations side by side in one table:
| Comparison item | Quotation A | Quotation B | Quotation C |
|---|---|---|---|
| Total price | |||
| Area quoted | |||
| Product name | |||
| FS251 included? | |||
| Registered contractor issuing FS251 and class | |||
| Extra charge for access equipment? | |||
| Out-of-hours surcharge | |||
| Cancellation or rescheduling terms | |||
| Quotation validity |
Information to Provide When Enquiring
- Premises address and use, such as a restaurant, tutorial school or exhibition booth
- Types of material to be treated and approximate areas
- Surface condition of the materials, including whether they are already painted or topcoated
- Ceiling height and any special structures
- Site photos or fitting-out drawings
- FSD letter of requirements (if any)
- Target completion date and available working hours
The more complete the information, the more accurate the quotation, and the lower the chance of extra charges later.
7. Legitimate Ways to Save Money
- Choose materials at the design stage: materials with a BS 476 Part 7 Class 1 or Class 2 test report may need no fire retardant treatment at all, only the report.
- Treat before painting: avoid treating after painting is finished, saving the cost of stripping coatings or replacing materials.
- Do all the work in one visit: group all materials needing treatment into a single job to avoid paying the starting price several times.
- Combine fire safety items: arrange the work together with other fire service installation works or annual inspections to save on attendance and documentation costs.
- Book early: allow enough time to avoid rush surcharges.
- Keep your documents: store test reports and FS251 certificates safely so that nothing needs redoing at licence renewal or inspection.
8. Common Pricing Traps
Trap 1: A low price that excludes the FS251
Some quotations only cover the work, with the FS251 charged separately. When comparing, confirm that the certificate is included in the total.
Trap 2: The work is not done by a Class 2 registered contractor
Work done by an unregistered person or a contractor of the wrong class cannot be covered by a valid FS251. It will have to be redone, meaning you pay twice. When enquiring, ask for the registered contractor's name and class. For more on contractor classes, see Hong Kong Fire Safety Laws and Regulations.
Trap 3: Buying fire retardant paint and applying it yourself
Buying the product and applying it yourself may seem to save money, but you cannot obtain an FS251. For licensed premises, this is the same as no treatment at all.
Trap 4: Underestimating the area
If the area is underestimated at quotation stage, large extra charges may follow on site. The quotation should state the area used and how any excess will be charged.
Trap 5: Paying even if the job is cancelled after attendance
Some contractors charge an attendance fee once staff arrive on site, even if the materials turn out to be unsuitable for treatment. Before confirming the order, send photos to confirm the material condition and check the cancellation terms.
9. Booking and Work Schedule
Fire retardant treatment generally needs to be booked about 2 to 3 weeks in advance so that staff and materials can be arranged. Plan according to the following timeline:
| Timing | What to complete |
|---|---|
| Fitting-out design stage | Settle material specifications and collect test reports |
| 3 to 4 weeks before work | Obtain quotations and confirm the materials and areas to be treated |
| 2 to 3 weeks before work | Confirm the contractor and book the work date |
| Before painting or assembly | Carry out fire retardant treatment |
| Within 14 days of completion | The contractor issues the FS251 and sends a copy to the FSD |
| Before inspection | Compile test reports, the FS251 and related documents |
10. Frequently Asked Questions
How is fire retardant paint usually priced?
In the market, pricing is mostly a starting price plus progressive charges by area. For example, there is a starting price for the first 22.5 m² or so, with an additional charge for each further area band. High-ceiling or structurally complex projects are usually quoted after a site assessment.
Does a fire retardant paint quotation always include the FS251?
Not always. Some quotations only include the work, with the FS251 charged separately. When enquiring, confirm that the quotation includes the FS251 and states the name and class of the registered contractor who will issue it.
How much does certification cost if no treatment is needed?
If the material already has a valid test report and meets the standard, the report alone is generally sufficient as proof. In some cases, such as verifying fabrics, the market reference fee is about HK$1,500 to HK$3,500 per set, depending on the project.
How is curtain fire retardant treatment priced?
Treating curtains with fire retardant solution costs about HK$30 to HK$80 per m² in the market, plus a certificate fee. If curtains are washed often, consider fabric that already meets BS 5867-2 Type B.
Can painted timber walls be treated with fire retardant paint? Will the price differ?
Surfaces that are already painted, topcoated or baked-enamelled generally cannot be treated directly. The coating must be removed or the material replaced, which raises costs considerably. Ideally, arrange fire retardant treatment before painting.
How much does fire retardant paint cost for an exhibition booth?
For a standard booth no larger than 3 m × 3 m × 2.5 m, market quotations are generally about HK$5,000 to HK$7,500, depending on materials and area. Larger or taller booths are quoted separately.
How far in advance should fire retardant paint work be booked?
It is generally advisable to book about 2 to 3 weeks in advance so that staff and materials can be arranged. If a licence inspection or exhibition date is approaching, contact a contractor as early as possible.
How soon after treatment will I receive the FS251?
Under the regulations, a Registered Fire Service Installation Contractor must issue the FS251 to the person who instructed the work within 14 days of completion, and send a copy to the FSD.
Request a Fire Retardant Paint Quotation
Grand United Eng., Co. is a Registered Fire Service Installation Contractor in Hong Kong. We assess fitting-out materials for restaurants, shops, schools, clubhouses and exhibition booths, and provide quotations that clearly state the area, product and certificate arrangements. When you contact us, please provide the premises use, material types, approximate areas, site photos and any FSD letter of requirements, and we will make an initial assessment. You can also browse our Project Cases and FAQ.
Request a fire retardant paint quotation now, or call 2667 7701.
