What Is Fire Retardant Paint? Principles, Types, Suitable Materials and Hong Kong Fire Safety Requirements
When applying for a restaurant licence, opening a shop or building an exhibition booth in Hong Kong, many people first come across the term "fire retardant paint" in a Fire Services Department (FSD) letter of requirements or inspection remarks. It may look like ordinary paint, but it involves material properties, application methods, contractor class and certification. This guide starts from the basics and answers the questions owners, tenants and fitting-out managers ask most often.
Quick answer: Fire retardant paint is a specially formulated coating that slows the spread of flame across the surface of combustible materials such as timber. In licensed or registered premises in Hong Kong, combustible fitting-out materials that do not meet the standard accepted by the FSD must be treated with fire retardant paint or solution by a Class 2 Registered Fire Service Installation Contractor, who then issues an FS251 certificate.
Contents
- What fire retardant paint is
- How fire retardant paint works
- Fire retardant paint vs fire retardant solution
- Suitable and unsuitable materials
- Hong Kong fire safety requirements
- How to tell whether treatment is needed
- Common misconceptions
- Frequently asked questions
1. What Fire Retardant Paint Is
Fire retardant paint, also called fire retardant coating or flame retardant paint, is a passive fire protection material made by adding flame retardant ingredients to a coating. It cannot extinguish a fire, and it does not make timber "non-combustible". What it does is delay ignition and slow the spread of flame across a surface. This buys time for occupants to evacuate and reduces the risk of fire spreading rapidly through a premises via its fitting-out materials.
Fire protection measures fall into two groups. Sprinklers, fire alarms and fire extinguishers are "active" systems that respond once a fire is detected. Fire retardant paint, fire doors and fire-rated boards are "passive" measures: they do nothing day to day, but limit fire through the performance of the material itself. Both are needed and work together. For an overview of different systems, see our Fire Engineering Services.
Fire Retardant Paint vs Ordinary Paint
| Aspect | Ordinary paint | Fire retardant paint |
|---|---|---|
| Main purpose | Appearance, moisture resistance, surface protection | Slowing flame spread and delaying ignition |
| Reaction to heat | May itself contribute to burning | Foams or chars under heat to form a protective layer |
| Appearance | Wide choice of colours and finishes | Looks similar to ordinary paint; some products are clear or milky white |
| Application | Can be applied by general painters | Must follow specified coverage and number of coats; in licensed premises it must be carried out by a Class 2 registered contractor |
| Documentation | None required | Product information must be kept and an FS251 submitted as required |
Because the two look so alike, you cannot tell by eye whether a material has been treated. During inspections, FSD officers check the supporting documents, not the colour of the paint.
2. How Fire Retardant Paint Works
Most common fire retardant paints are "intumescent" coatings. Under normal conditions they behave like any other paint film. When exposed to high temperatures, the coating foams and swells to many times its original thickness, forming a porous, charred insulating layer that blocks heat from reaching the material underneath. Some products also release non-combustible gases when heated, diluting the oxygen at the surface and making it harder for flames to sustain.
Another type is "non-intumescent" or impregnating treatment. Here the flame retardant ingredients penetrate the fibres of the material, so that timber or fabric tends to char rather than flame when heated. This type of treatment leaves no obvious surface coating and is more commonly used on fabrics, curtains and untreated timber.
Why Correct Coverage Matters
Fire performance is directly linked to coating thickness and coverage. If too little is applied, the intumescent layer will not insulate adequately. An overly thick or incompatible topcoat may also stop the fire retardant layer from expanding properly. Proper application therefore controls coverage per square metre, number of coats and drying time according to the product instructions, and keeps a record of the work. It is not simply a matter of brushing on one or two coats.
3. Fire Retardant Paint vs Fire Retardant Solution
Hong Kong fire safety documents often mention both "fire retardant paint" and "fire retardant solution". Both serve the same purpose, but they are applied differently and suit different materials:
- Fire retardant paint: brushed or sprayed onto a surface to form a fire retardant coating. It is commonly used on hard surfaces such as timber partitions, timber wall finishes and false ceiling boards.
- Fire retardant solution: sprayed on or used for soaking so that it penetrates the material. It is commonly used on drapes, curtains, fabric decorations and some untreated timber.
Which one to use depends on the type of material, its surface condition and how the premises is used. Either way, the product should be one accepted by the Director of Fire Services and applied by a qualified contractor according to the product requirements.
A Related Concept: Fire Protective Coatings for Structural Steel
The market also offers structural fire protective coatings for steel beams and columns. These slow the temperature rise of steel during a fire so that the structure keeps its load-bearing capacity, and they are usually rated by fire resistance period (for example 60 or 90 minutes). This falls under building structural fire resistance requirements. It differs in standards, design and approval from the fire retardant paint discussed here, which deals with surface flame spread on fitting-out materials. State the intended use clearly when requesting a quotation to avoid confusion.
4. Suitable and Unsuitable Materials
Not every surface can be treated. A product only works if it can adhere to or penetrate the material. The general principles are as follows.
Materials Generally Suitable for Treatment
- Unpainted solid timber and plywood without waterproofing or special chemical treatment
- Ordinary fabrics, curtains, drapes and fabric decorations
- Carpets without waterproof or stain-resistant treatment
- Timber structures and fabric backdrops in exhibition booths and temporary installations
Materials Generally Unsuitable for Direct Treatment
- Waterproof fabrics or surfaces that have been waterproofed
- Surfaces already painted, varnished or finished with a topcoat
- Baked or stove-enamelled finishes
- Timber already covered with laminate or other surface finishes
If the need for fire retardant treatment is only discovered after fitting-out is finished and the materials are painted, the materials often have to be replaced or treated in some other way. This adds considerable cost and time. Ideally, material specifications should be settled at the design stage, either by choosing materials that already meet the standard or by scheduling fire retardant treatment before painting.
5. Hong Kong Fire Safety Requirements
Under the FSD's requirements for licensed or registered premises, materials used for false ceilings, partitions or wall finishes must meet Class 1 or Class 2 surface spread of flame under British Standard BS 476 Part 7, or an equivalent standard accepted by the Director of Fire Services. When restaurants, food factories and certain educational and entertainment premises apply for or renew a licence, the FSD reviews these materials against the fire safety standards for that type of premises.
Two Routes to Compliance
| Situation | Approach | Documents to submit |
|---|---|---|
| Material already meets the specified standard | No additional fire retardant treatment needed | Product catalogue, test report or other supporting documents |
| Material does not meet the specified standard | Treated with fire retardant paint or solution by a Class 2 Registered Fire Service Installation Contractor | FS251 Certificate of Fire Service Installations and Equipment |
In other words, fire retardant paint is not the only option. Choosing materials with valid test reports at the procurement stage avoids the treatment work altogether. If the origin of a material is unclear, it has no test report, or it is ordinary timber or fabric, it will need fire retardant treatment and an FS251.
Why a Class 2 Registered Contractor Is Required
Registered Fire Service Installation Contractors in Hong Kong are divided into three classes, each responsible for different types of installations. Treating fitting-out materials with fire retardant paint or solution falls within the scope of Class 2 contractors. If the work is done by an unregistered person or a contractor of the wrong class, a valid FS251 cannot be issued even if the correct product was used, and the work will not be accepted at inspection. For more on contractor classes and the related legislation, see Hong Kong Fire Safety Laws and Regulations.
The Role of the FS251
The FS251 is a certificate issued by a registered contractor after completing work on fire service installations or equipment, and the contractor must send a copy to the FSD as required. For fire retardant treatment, the certificate confirms that the materials have been treated with an accepted product by a qualified contractor. For details on how the FS251 is issued and submitted, see our Complete Guide to Fire System Maintenance and FS251 Annual Inspection.
6. How to Tell Whether Treatment Is Needed
You can make an initial assessment in four steps:
- Confirm the type of premises: check whether the premises needs a licence or registration, such as a restaurant, food factory, tutorial school or amusement game centre. Requirements for licensed premises are generally stricter.
- List combustible fitting-out materials: include false ceilings, timber partitions, timber wall finishes, drapes, curtains, fabric decorations and carpets, and record their locations and areas.
- Check material documentation: ask your fitting-out contractor or supplier for product catalogues and test reports, and confirm whether they meet BS 476 Part 7 Class 1 or Class 2 or an equivalent standard.
- Arrange treatment and documents: for materials without supporting documents, arrange for a Class 2 contractor to treat them before painting or installation, and obtain the FS251 before the inspection.
If the premises also needs other fire service installations installed or inspected, such as exit signs, emergency lighting or portable fire extinguishers, these can be arranged at the same time to reduce site visits and waiting time. For service arrangements in different districts, see our Service Coverage.
7. Common Misconceptions
Misconception 1: Buying fire retardant paint and applying it yourself is enough
Work done yourself or by a general painter cannot be covered by an FS251. For licensed premises, having no certificate is the same as having no treatment, and you will still be asked to redo the work at inspection.
Misconception 2: Fire-rated boards and fire retardant paint are interchangeable
They are different solutions. Fire-rated boards with valid test reports can satisfy requirements directly through their documentation. Painting fire retardant paint over a fire-rated board is pointless, as the paint cannot adhere properly.
Misconception 3: One treatment lasts forever
The effectiveness of fire retardant treatment can be affected by washing, wear, sunlight and repainting. After drapes are washed repeatedly, or timber surfaces are sanded or repainted, the original treatment may no longer work and should be reassessed.
Misconception 4: Only restaurants need treatment
Apart from restaurants, exhibition booths, shopping mall event venues and other licensed premises may also be required to prove that their fitting-out materials meet the standard. Always follow the written requirements from the FSD or the licensing authority.
8. Frequently Asked Questions
Can fire retardant paint make timber completely fireproof?
No. Fire retardant paint delays ignition and slows flame spread across a surface. It is a passive fire protection measure and cannot replace fire service installations such as sprinklers, fire alarms and fire extinguishers.
How do I choose between fire retardant paint and fire retardant solution?
Hard surfaces such as timber partitions and timber wall finishes are usually treated with fire retardant paint, while drapes, curtains and fabrics are usually treated with fire retardant solution. The final choice should be assessed by a registered contractor based on the material, its surface condition and the product requirements.
Can fire retardant paint be applied over painted timber doors or walls?
Generally not directly, because the existing paint film prevents the fire retardant product from adhering or penetrating. The usual options are to remove the existing coating, replace the material, or switch to a material with a valid test report.
Is an FS251 always required after treatment?
In licensed or registered premises, combustible materials treated with fire retardant paint or solution must be treated by a Class 2 Registered Fire Service Installation Contractor and an FS251 must be submitted. If the material already meets the specified standard, a product catalogue or test report serves as proof instead.
Do residential flats need fire retardant paint?
Ordinary residential flats are not licensed premises, so the legal requirements differ from those for restaurants and similar premises. However, if a flat uses a lot of timber or fabric in its fitting-out, owners may still consider fire retardant materials for added safety. A registered contractor can advise on specific cases.
How long does fire retardant treatment take?
It depends on the area, material, number of coats and drying time, plus time for preparing materials and scheduling the contractor. Book early before a licence inspection or exhibition opening, rather than leaving it until the last minute.
Need Your Fitting-Out Materials Assessed?
Grand United Eng., Co. is a Registered Fire Service Installation Contractor in Hong Kong. We can help assess whether false ceilings, partitions, wall finishes and fabrics in your premises need fire retardant treatment, and arrange the related works and certificates. When you contact us, please provide the premises address, its use, material types, areas and any FSD letter of requirements, so we can make an initial assessment. You can also browse our Fire Safety Products, Project Cases and FAQ.
Request a fire retardant treatment quotation, or call 2667 7701.
